header_gr

Αρχική σελίδα

Προσωπικό

Εξοπλισμός

Διδασκαλία

Έρευνα

Δημοσιεύσεις

Συνεργασίες

Υπηρεσίες

Ερ. Προγράμματα

Downloads

Ανακοινώσεις

Επικοινωνία
logo_ylikwn

Δημοσιεύσεις

Βιβλία:

  1. A. Lekatou: “Corrosion and Protection of Metals in Simple Words”, 2013, Nemertes Pub., ISBN: 978-960-9951-2-4, 620 p. (in Greek)

  2. A. Lekatou: «Introduction to Corrosion & Protection of Metals», 2010, Theodoridis Pub, ISBN: 978-960-86109-9-6, 400 p. (in Greek)

  3. A. Lekatou: «Phase Transformation in Metals», Theodoridis Pub, 2009, ISBN-978-960- 86109-3-4, 393 p. (in Greek)

  4. A. Lekatou, S. Lekatos: «Introduction to Physical Metallurgy Ι», Theodoridis Pub., 2008, ISBN-978-960-86109-8-9, 304 p. (in Greek)

  5. A. Lekatou: «Engineering Alloys», Papasotiriou Pub., 2005, ISBN 960-7530-62-4, 431 p. (in Greek)

  6. A. Lekatou (editor): Proceedings of the 6th Pan-Hellenic Conference in Metallic Materials, Ioannina, 7-9 Dec. 2016, Tziolas Pub., ISBN: 978-960-418-664-8

Επιστημονικά Περιοδικά με κριτές:

  1. Efremenko V.G., Chabak Yu.G., Shimizu K., Lekatou A.G., Zurnadzhy V.I., Karantzalis A.E., Halfa H., Mazur V.A., Efremenko B.V., Structure refinement of high-Cr cast iron by plasma surface melting and post-heat treatment, Materials Design, 2017, http://doi.org/10.1016/j.matdes.2017.04.022

  2. A.G. Lekatou, I. Kenanoglou, K. Kalantzis, A.E. Karantzalis, D. Sioulas, K. Lentzaris, A.K. Sfikas, Surface Degradation of Composites Prepared by Al2O3 and Ni Nanopowders, Mater. Sci. Eng. Adv. Res., 2017, accepted

  3. K. Lentzaris, A.G. Lekatou, A. Ntoumazios, A.E. Karantzalis, A.K. Sfikas, Solid Particle Erosion of Aluminum In-Situ Reinforced with a Cobalt Aluminide, Mater. Sci. Eng. Adv. Res., 2017, accepted

  4. A. Lekatou, N. Gkikas, A.E. Karantzalis, G. Kaptay, Z. Gacsi, P. Baumli, A. Simon, Effect of wetting agent and carbide volume fraction on the wear response of aluminum matrix composites reinforced by WC nanoparticles and aluminide particles, accepted for publication to Archives of Metallurgy and Materials

  5. A. Poulia, E. Georgatis, A. Lekatou, A.E. Karantzalis, Dry - sliding wear response of MoTaWNbV high entropy alloy, Adv. Eng. Mater. DOI: 10.1002/adem.201600535.

  6. A. Lekatou, A.K. Sfikas, Ch. Petsa, A.E. Karantzalis, Al-Co alloys prepared by vacuum arc melting: Correlating microstructure evolution and aqueous corrosion behavior with Co content, Metals 2016, 6(3), 46; doi:10.3390/met6030046, Special issue: Oxidation of metals.

  7. A. Poulia, E. Georgatis, A. Lekatou, A.E. Karantzalis, Microstructure and wear behavior of a refractory high entropy alloy, Int. Journal of Refractory Metals and Hard Materials, 2016, 57, 50–63.

  8. D. Baltzis, S. Orfanidis, A. Lekatou, A.S. Paipetis, Stainless steel coupled with carbon nano-tube modified epoxy and carbon fibre composites: Electrochemical and mechanical study, Plastics, Rubber and Composites: Macromolecular Engineering, 2016, 45(3), 95-103.

  9. V. Efremenko, Y.G. Chabak, A. Lekatou, A. Karantzalis, A. Efremenko, High-temperature oxidation and decarburization of 14.55 wt pct Cr-cast iron in dry air atmosphere, Metallurgical & Materials Transactions A, 2016, 47 (4), 1529-1543

  10. V.Gousia, A. Tsioukis, A. Lekatou, A.E. Karantzalis, Al-MoSi2 particulate composites produced by flux-aided casting: Assessment of microstructure, sliding wear, solid particle erosion and aqueous corrosion behaviour, J. Materials Engineering & Performance, 2016,25 (8), 3107-3120.

  11. A.E. Karantzalis, Z. Arni, K. Tsirka, A. Evangelou, A. Lekatou, V. Dracopoulos, Fabrication of TiC reinforced composites by Vacuum Arc Melting: TiC mode of re-precipitation in different molten metals and alloys, J. Materials Engineering & Performance, 2016,25 (8), 3161-3172.

  12. V.G. Efremenko, Yu.G. Chabak, A. Lekatou, A.E. Karantzalis, K. Shimizu, V.I. Fedun, A.Yu. Azarkhov, A.V. Efremenko, Pulsed plasma deposition of Fe-C-Cr-W coating on high-Cr-cast iron: Effect of layered morphology and heat treatment on the microstructure and hardness, Surface & Coatings Technology, 2016, 304, 293-305.

  13. A. Lekatou, D. Sioulas, A.E. Karantzalis, D. Grimanelis, A comparative study on the microstructure and surface property evaluation of coatings produced from nanostructured and conventional WC–Co powders HVOF-sprayed on Al7075, Surface & Coatings Technology, 2015, 276, 539–556.

  14. G. Xanthopoulou, A. Marinou, G. Vekinis, A. Lekatou, M. Vardavoulias, Synthesis and heat treatments of NiAl-Ni3Al high-temperature sprayed coatings by in-flight combustion synthesis (CAFSY), Int. J.  Self-Propagating High-Temperature Synthesis, 2015, 24(4), 192–202

  15. A. Simon, D. Lipusz, P. Baumli, P. Balint, G. Kaptay, G. Gergely, A. Sfikas, A. Lekatou, A. Karantzalis, Z. Gacsi, Microstructure and mechanical properties of Al-WC composites, Archives of Metallurgy and Materials, 2015, 60(2), 1517-1521.

  16. Somlyai-Sipos L. - Baumli P. - Kaptay G. - Bálint P. - Dezső A. - Simon A. - Gácsi Z. - Lekatou, A. - Sfikas, T. - Karantzalis, A., Volfrám-karbid szemcsékkel erősített alumínium mátrixú kompozit fejlesztése (Development of tungsten carbide particle reinforced aluminum matrix composites), Bányászati és kohászati lapok (Mining and Metallurgical Pages). Kohászat (Metallurgy), 2015, 148(2), 34-39, in Hungarian.

  17. A. Lekatou, A.E. Karantzalis, A. Evangelou, V. Gousia, G. Kaptay, Z. Gacsi, P. Baumli, A. Simon, Aluminium reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): Microstructure, wear and corrosion behaviour, Materials & Design, 2015, 65(1), 1121-1135.

  18. G. Gkikas, A. Lekatou, D. Sioulas, A.S. Paipetis, Effect of MWCNT doped adhesives on the degradation of bonded joints in corrosive environments, Plastics, Rubber and Composites, 2014, 43(10), 322-329.

  19. G. Xanthopoulou, A. Marinou, G. Vekinis, A. Lekatou, M. Vardavoulias,Ni-Al and NiO-Al composite coatings by combustion-assisted flame spraying, Coatings 2014, 4, 241-260; doi:10.3390/coatings4020241

  20. A.E. Karantzalis, A. Lekatou, M. Evaggelidou, Microstructure and sliding wear assessment of Co-TiC composite materials, Int. J. Cast Metals Research, 2014, 27 (2), 73-79.

  21. G. Gkikas, A. Paipetis, A. Lekatou, N.M. Barkoula, D. Sioulas, B. Canflanca, S. Florez, Corrosion and environmental degradation of bonded composite repair, I. J. Structural Integrity, 2013, 4 (1), 67-77.

  22. H. Mavros, A.E. Karantzalis, A. Lekatou, Solidification observations and sliding wear behaviour of cast TiC particulate reinforced AlMgSi matrix composites, J. Composite Materials, 2013, 47 (17), 2149-2162

  23. A. Lekatou, A. Sfikas, A.E. Karantzalis, D. Sioulas, Microstructure and corrosion performance of Al-Co alloys, Corrosion Science, 2012, 63, 193-209.

  24. E. Georgatis, A. Lekatou, A.E. Karantzalis, H. Petropoulos, S. Katsamakis, A. Poulia, Development of a cast Al-Mg2Si-Si In-Situ composite: microstructure, heat treatment and mechanical properties, J. Materials Engineering & Performance, 2013,22 (3), 729-741

  25. A.E. Karantzalis, A. Lekatou, A. Kapoglou, H. Mavros, V. Dracopoulos, Phase transformations and microstructural observations during subcritical heat treatments of a high-chromium cast iron, J. Materials Engineering and Performance, 2012,21 (6), pp. 1030-1039

  26. G. Gkikas, D. Sioulas, A. Lekatou, N.M. Barkoula, A.S. Paipetis,Enhanced bonded aircraft repair using nano-modified adhesives, Materials and Design, 2012, 41, 394-402

  27. A. Karantzalis, A. Lekatou, K. Tsirka, Solidification observations and sliding wear behavior of vacuum arc melting processed Ni–Al–TiC composites, Materials Characterization, 2012, 69, 97-107.

  28. D. Zois, A. Lekatou, M. Vardavoulias, T. Vaimakis, A.E. Karantzalis, Partially amorphous stainless steel coatings: Microstructure, annealing behaviour and statistical optimization of spray parameters, Surface & Coatings Technology, 2011, 206 (6), 1469-1483.

  29. A.E. Karantzalis, A. Lekatou, E. Georgatis, Z. Arni, V. Dracopoulos, Solidification observations of vacuum arc melting processed FeAl-TiC composites: TiC precipitation
    mechanisms,     Materials Characterization, 62(12), 2011, 1196-1204.

  30. A.E. Karantzalis, A. Lekatou, E. Georgatis, V. Poulas, H. Mavros, Casting-based production of Al-TiC-AlB2 composite material through the use of KBF4 salt, J. Materials Engineering and Performance, 2011,20 (2) 198-202.

  31. A. Lekatou, D. Zois, A.E. Karantzalis, Electrochemical behaviour of cermet coatings with a bond coat on Al7075: pseudopassivity, localized corrosion and galvanic effect considerations in a saline environment, Corrosion Science, 2010, 52 (8) 2616-2635.

  32. D. Zois, A. Lekatou, M. Vardavoulias, Preparation & characterization of highly amorphous stainless steel coatings, J. Alloys & Compounds, 2010, 504, S283-S287.

  33. A.E. Karantzalis, A. Lekatou, E. Georgatis, Th. Tsiligiannis, H. Mavros, Solidification observations in dendritic cast Al-alloys reinforced with TiC particles, J. Materials Engineering and Performance, 2010, 19(9), 1268-1275.

  34. A.E. Karantzalis, A. Lekatou, E. Georgatis, Η. Mavros, Solidification behaviour of ceramic particle reinforced Αl – alloy matrices, J. Mater. Sci., 2010, 45(8), 2165-2173.

  35. A.E. Karantzalis, A. Lekatou, E. Georgatis, V. Poulas, H. Mavros,Μicrostructural observations in a cast Al-Si-Cu-TiC composite material, J. Materials Engineering and Performance, 2010,19 (4), 585-590.

  36. A. Lekatou, A. Marinou, P. Patsalas, M.A. Karakassides, Aqueous corrosion behaviour of Fe-Ni-B metal glasses, J.  Alloys&Compounds, 2009, 483, 514-518.

  37. D. Zois, A. Lekatou, M. Vardavoulias, A microstructure and mechanical property investigation on thermally sprayed nanostructured ceramic coatings before and after a sintering treatment, Surface & Coatings Technology, 2009, 204, 15-27.

  38. A.E. Karantzalis, A. Lekatou, H. Mavros, Microstructure and properties of high chromium cast irons: effect of heat treatments and alloying additions, Int. J. Cast Metals Research, 2009, 22(6), 448-456.

  39. A.E. Karantzalis, A. Lekatou, E. Diavati, Effect of destabilization heat treatments on the microstructure of high-chromium cast iron: a microscopy examination approach, J. Materials Engineering and Performance, 2009, 18(8), 1078-1085.

  40. D. Zois, A. Lekatou, M. Vardavoulias, A. Vazdirvanidis, Νanostructured alumina coatings manufactured by air plasma spraying: correlation of properties with the raw powder microstructure, J. Alloys & Compounds, 2010, 495, 611-616.

  41. A.E. Karantzalis, A. Lekatou, H. Mavros, Microstructural modifications of as-cast high chromium white iron by heat treatment, J. Materials Engineering and Performance, 2009, 18(2), 174-181.

  42. A. Lekatou, E. Regoutas, A.E. Karantzalis, Corrosion behaviour of cermet-based coatings with a bond coat in 1Μ H2SO4, Corrosion Science, 2008, 50(12), 3389-3400.

  43. A. Lekatou, D. Zois, D. Grimanelis, Corrosion properties of HVOF cermet coatings with bond coats in an aqueous chloride environment , Thin Solid Films, 2008, 516 (16), 5700-5708.

  44. D. Zois, A. Lekatou, M. Vardavoulias, I. Panagiotopoulos, A. Vazdirvanidis, Μicrostructural and mechanical property investigation of nanostructured and conventional Al2O3 coatings deposited by plasma spraying, J. Thermal Spray Technology, 2008, 17(5-6), 887-894.

  45. E. Diamanti, A. Lekatou, T. Matikas, M.A. Karakassides, Influence of montmorillonite clay on structure and properties of sodium borate glasses, Advanced Materials Research, 2008, 39-40, 57-60.

  46. P. Patsalas, A. Lekatou, E. Pavlidou, S. Foulias, M. Kamaratos, G.A. Evangelakis, A.R. Yavari, Surface Properties and Activity of the Fe-Ni-B Ternary Glass System, J. Alloys & Compounds, 2007, 434-435, 229-233.

Πρακτικά διεθνών συνεδρίων:

  1. K. Lentzaris, A.G. Lekatou, A.E. Karantzalis, E. Hantziara, N. Gkikas, V. Gousia, Sliding wear and solid particle erosion response of aluminium reinforced with tungsten carbide nanoparticles and aluminide particles, EUROMAT 2017, Sept. 17-22, 2017, Thessaloniki, Greece.

  2. A.G. Lekatou, A.E. Karantzalis, N. Gkikas, V. Gousia, Solidification sequence and saline corrosion performance of cast aluminium matrix composites reinforced with submicron tungsten carbide particles, EUROMAT 2017, Sept. 17-22, 2017, Thessaloniki, Greece.

  3. D. Baltzis, A. Daflos, A.G. Lekatou, A.S. Paipetis, Wear performance of epoxy resins: Influence of carbon reinforcing phases, EUROMAT 2017, Sept. 17-22, 2017, Thessaloniki, Greece.

  4. S. Tsouli, A.G. Lekatou, S. Kleftakis, Corrosion performance of stainless steel concrete reinforcement in acid rain simulating environments using fly ash as corrosion inhibitor, EUROMAT 2017, Sept. 17-22, 2017, Thessaloniki, Greece.

  5. A. Lekatou, A.E. Karantzalis, I. Kenanoglou, A.K. Sfikas, K. Lentzaris, D. Sioulas, Corrosion and wear behaviour of Al2O3-Ni nanocomposites, 17th Int. Conf. on Experimental Mechanics (ICEM 17) July 3-7, 2016, Rhodes, Greece 

  6. A.K. Sfikas, A. Lekatou, A.E. Karantzalis, Sliding wear behaviour of rapidly solidified Al-Co alloys, 17th Int. Conf. on Experimental Mechanics (ICEM 17) July 3-7, 2016, Rhodes, Greece 

  7. A. Lekatou, N. Gkikas, V. Gousia, A. Evaggelou, A.E. Karantzalis, G. Kaptay, Z. Gacsi, P. Baumli, A. Simon, Effect of wetting agent and carbide volume fraction on the surface properties of aluminium matrix composites ex-situ reinforced by WC nanoparticles and in-situ reinforced by aluminide particles, 14th Int. Symp. on Novel and Nano Materials (ISNNM-2016), Budapest, 3-8 July 2016, Hungary.

  8. A. Poulia, Petroglou, A. Lekatou, A. E. Karantzalis, Development and characterization of new refractory high entropy alloys, 14th Int. Symp. on Novel and Nano Materials (ISNNM-2016), Budapest, 3-8 July 2016, Hungary.

  9. A. K. Sfikas, A. Lekatou, A. E. Karantzalis, Ch. Petsa, Effect of Co content on the corrosion resistance of rapidly solidified Al-Co alloys, ICEAF-IV, 4thInt. Conf. Engineering against Failure, Skiathos, 24-26 June 2015, Greece, p. 441-448, ISBN: 978-960-88104-5-7

  10. D. Baltzis, A. Lekatou, A.S. Paipetis, Nano modified epoxy resins for carbon fiber reinforced composites applied in aerospace aluminum sheet patched repairs, ICEAF-IV, ibid, p. 464-471, ISBN: 978-960-88104-5-7

  11. S. Orfanidis, D. Baltzis, A. Lekatou, A.S. Paipetis, Electrochemical and mechanical study of steel coupled with nano-reinforced adhesives, ICEAF-IV, ibid, p. 449-456, ISBN: 978-960-88104-5-7

  12. H. Mavros, A.E. Karantzalis, A. Lekatou, Comparative study of Al – based ceramic particulate reinforced composite materials: Sliding wear and aqueous corrosion assessment, ICEAF-IV, ibid, p. 424-432, ISBN: 978-960-88104-5-7

  13. A. Simon, D. Lipusz, P. Baumli, G. Kaptay, A. Lekatou, A. Karantzalis, Z. Gacsi, Development and characterization of Al matrix composites reinforced with ceramic particles, Proc. 13th Int. Symp. on Novel and Nano Materials-ISNNM 2014, 30/06-04/07 2014, Krakow.

  14. A. K. Sfikas, A. Lekatou, A. E. Karantzalis, D. Sioulas, Microstructure and corrosion resistance of aluminum alloys containing complex metallic alloy phases, Proc. ICEAF –III, 3rd Int. Conf. on Engineering against Failure, Kos, 26-28 June 2013, Greece, p. 194-203, ISBN: 978-960-88104-3-3

  15. A.E. Karantzalis, A. Lekatou, A. Evangelou, V. Gousia, C. Miskaki, A. Sfikas, D. Sioulas, Z. Gacsi, P. Baumli, G. Kaptay, A. Simon, Microstructure, corrosion and wear resistance evaluation of aluminium matrix composites reinforced by TiC and WC nanoparticles,ICEAF –III, ibid, p. 214-222, ISBN: 978-960-88104-3-3

  16. G. Gkikas, D. Sioulas, A. Lekatou, A.S. Paipetis, Use of nano-modified adhesives to improve the environmental degradation, the mechanical and corrosive properties of bonded joints,ICEAF –III, ibid, p. 630-637.

  17. A. Poulia, A.E. Karantzalis, A. Lekatou, Evaluation of Al-Mg2Si in-situ composites, further reinforced by TiC particles after solution and aging heat treatments, 9th Int. Conf. on Composite Science and Technology, 24-26 April 2013 - Sorrento, Italy, ed. Michele Meo, Destech Pub, 677-689, ISBN: 978-1-60595-113-3.

  18. A.E. Karantzalis, A. Lekatou, V. Gousia, A. Evangelou, Z. Gacsi, P. Baumli, G. Kaptay, A. Simon, Flux assisted casting preparation and surface property evaluation of aluminium matrix composites reinforced with carbide nanoparticles, 9th Int. Conf. on Composite Science and Technology, ibid., ed. Michele Meo, Destech Pub, 690-701, ISBN: 978-1-60595-113-3.

  19. A. Rossos, K. Leontaris, A. Karantzalis, A. Lekatou, D.Gournis, S.Agathopoulos, Nano-composites of carbon nanotubes (CNT): Sn-filled nanowires and CNT-reinforced Al. 8th High Temperature Capillarity Conference (HTC-2015), Bad-Herrenalb, Germany, May 17-21, 2015. ¥

  20. A. Marinou, G. Xanthopoulou, G. Vekinis, A. Lekatou, M. Vardavoulias, Optimization of parameters for NiAl composite coatings produced CAFSY method, XII International Symposium on Self-Propagating High Temperature Synthesis. 21 - 24 October 2013. (South Padre Island, TX, USA), 270-273.

  21. A. Marinou, G. Xanthopoulou, G. Vekinis, A. Lekatou, M. Vardavoulias, Influence of thermal treatment of novel NiAl coatings produced by in-flight Combustion Synthesis, EUROMAT 2013, Sept. 8-13 2013, Seville.¥

  22. A. Siatou, A. Lekatou, Corrosion observations on archaeological bronze and correlation with observations under simulating conditions, BRONZE CONSERVATION COLLOQUIUM 2012, State Academy of Art & Design, Stuttgart, 22-23 Jun 2012,G. Eggert & B. Schmutzler (Eds.) p. 35-38

  23. A. Marinou, G. Xanthopoulou, G. Vekinis, A. Lekatou, M. Vardavoulias, Ni-Al composite coatings by SHS-activated thermal spraying, European Workshop New Approaches to High Temperature Coatings, 15-17 Oct 2012, Lanzarote, Spain. ¥

  24. D. Zois, A. Lekatou, Μ. Vardavoulias, A.E. Karantzalis, Α. Vazdirvanidis, Deposition and characterization of thermally sprayed coatings prepared by a nanostructured Martensitic Steel Powder, Thermal Spray 2012: Proc. Int. Thermal Spray Conference (ASM Int.), 21-25 May 2012, Houston, Texas, p. 64-69.

  25. Siatou A., A. Lekatou, A. Karantzalis, D. Sioulas, Corrosionof archaeological bronze in non-hostile burial environment, Int. Symp: History, Technology and Conservation of Ancient Metal, Glasses and Enamels, 16-19November 2011, Athens, Greece.

  26. A. Marinou, G. Xanthopoulou, G. Vekinis, A. Lekatou, M. Vardavoulias, Composite coatings in the systems Ni-Al and NiO-Al by in-flight combustion synthesis during thermal spraying, XI Int. Symp. of Self-Propagating High Temperature Synthesis SHS2011 – 5-9 September 2011 – Anavyssos, Greece ¥

  27. D. Sioulas, A. Lekatou, D. Grimanelis, A.E. Karantzalis, Corrosion and wear resistance of HVOF micro- and nano- cermet coatings on Al 7075, ICEAF –II, 2nd Int. Conf. Engineering against Fracture, Mykonos, 22-24 June 2011.

  28. G. Gkikas, A. Paipetis, A. Lekatou, N.M. Barkoula, D. Sioulas, B. Canflanca, S. Florez, Corrosion and environmental degradation of bonded composite repair, ICEAF –II, 2nd Int. Conf. Engineering against Fracture, Mykonos, 22-24 June 2011.

  29. A. Siatou, A. Lekatou, Morphology of corrosion on excavated archaeological metal artefacts, Int. Workshop on Works of Art & Conservation Science Today, Thessaloniki, 26-28 November 2010

  30. G. Gkikas, A. Paipetis, N. M. Barkoula A. Lekatou,D. Sioulas, Enhancedbondedaircraftrepairusingnano-modifiedadhesives, 14thEur. Conf. on Composite Materials, Budapest 7-10 June 2010, Paper ID: 660

  31. D. Zois, A. Lekatou, M. Vardavoulias, Fabrication & evaluation of metastable stainless steel coatings, Int. Symp. on Metastable, Amorphous and Nanostructured Materials-ISMANAM 2009, July 2009, Beijing, China.

  32. A.E. Karantzalis, A. Lekatou, K. Leontaris, Synthesis and characterization of Al-based MMCs reinforced with ceramic nanoparticles, Cast Composites 2009, 11-14 Oct. 2009, Krakow, Poland

  33. M.A. Karakassides, E. Diamanti, A. Lekatou, Structure, chemical durability and physical properties of sodium borate glasses incorporating commercial bentonite, Int. Symp. on Metastable, Amorphous and Nanostructured Materials, 6-10 July 2008, Buenos Ayres, Argentina.

  34. D. Zois, A. Lekatou, D. Grimanelis, A. Vasilakos, Aqueous corrosion mechanism of HVOF cermet coatings with bond coats, 6th Int. Conf. on Advanced Composite Technologies, 16-18 May 2007, Corfu, Paper ID: COMP07 - 050.

  35. M. Karakassides, E. Diamanti, I. Sanakis, A Lekatou: Development of new glasses of low glass transition temperatures for heavy metal entrapment, International Symposium on Advanced Ceramics (ISAC-3). 11-15 Dec. 2006, Singapore.

  36. A. Lekatou, N. Gavrilakis, D. Grimanelis, Electrochemical behaviour of MMC HVOF coatings”, Thermal Spray 2006: Science, Innovation, and Application,” Ed. B. R. Marple, C. Moreau, Pub. ASM Int., Materials Park, OH, USA, 2006, ISBN 0-87170-809-4. 207

Πρακτικά πανελληνίων συνεδρίων:

  1. A. K. Sfikas, A. Kanterakis, A. Barmpas, A.G. Lekatou, A. E. Karantzalis, Corrosion performance of new Al-Co alloys manufactured by rapid solidification, 6th Pan-Hellenic Conference in Metallic Materials, Ioannina, 7-9 Dec. 2016, 415-420, ISBN: 978-960-418-664-8.

  2. S. Tsouli, A.G. Lekatou, S. Kleftakis, A. E. Karantzalis, A. K. Sfikas, Study of accelerated corrosion of 316L concrete reinforcing rods in concrete simulating environments for application to restoration works of ancient members, 263-268, ibid.

  3. A. Fefekos, A.G. Lekatou, A.E. Karantzalis, Preparation of Al-W alloys by vacuum arc melting and characterization, 367-372, ibid.

  4. K. Lentzaris, A.G. Lekatou, A. E. Karantzalis, Ε. Antonakis, High temperature oxidation behavior of heat treated cast austenitic stainless steel, 89-94, ibid.

  5. A. K. Sfikas, A.G. Lekatou, A. E. Karantzalis, Sliding wear performance of Al in situ reinforced by Al9Co2: a comparative study with commercial Al alloys, 287-292, ibid.

  6. A.G. Lekatou, I. Kenanoglou, K. Kalantzis, A.E. Karantzalis, D. Sioulas, K. Lentzaris, A.K. Sfikas, A. E. Karantzalis, Surface degradation of composites prepared by Al2O3 and Ni nanopowders, 427-432, ibid.

  7. G. Bakoulis, A. Lekatou, A. Poulia, A. K. Sfikas, A. E. Karantzalis, Fabrication, sliding wear and aqueous corrosion behaviour of Αl - (Al9Co2, Al13Co4) composites using a powder metallurgy route, 391-396, ibid.

  8. E. Karapanou, A. Lekatou, A. K. Sfikas, A. E. Karantzalis, Vacuum Arc Melting processed Fe-Al Matrix Based Intermetallic Composites, Reinforced with VC phases: Assessment of microstructure, sliding wear and aqueous corrosion response, 469-474, ibid.

  9. K. Lentzaris, A. Ntoumazios,A. Barmpas, A.K. Sfikas, A. Poulia,A.E. Karantzalis, A. Lekatou, Sliding wear and solid particle erosion behaviour of Al-Co Alloys, 475-480, ibid.

  10. M. Piritzaus, A. Lekatou, A. Poulia, A.E. Karantzalis, Development and characterization of novel Al-Mo based intermetallic – quasicrystal alloys, 379-384, ibid.

  11. K. Lentzaris, Ch. Papaspyrou, V. Gousia, A.K. Sfikas, A.E. Karantzalis, A. Lekatou, Development and evaluation of MoSi2 aluminum – matrix composites, 433-438, ibid.

  12. A. Koletti, H. Dickert, J. Gervelmeyer, O. Rösch, A. Lekatou, S. Papaefthymiou, Effect of processing on austenite grain growth of the microalloyed, Nb-modified, case-hardening 16MnCrB5 steel, 27-32, ibid.

  13. D. Baltzis, A.G. Lekatou, A. S. Paipetis, Corrosion monitoring of anodized aluminum with acoustic emission, 275-280, ibid.

  14. S. Orfanidis, D. Baltzis, A.G. Lekatou, A. S. Paipetis, The study of mechanical and electrochemical integrity of Invar bonded with nano-modified epoxy resin, 251-256, ibid.

  15. A.Ε. Καράντζαλης, Ζ. Arni, Κ. Τsirka, Α. Evaggelou, Α. Lekatou, V. Drakopoulos, Fabrication of TiC-reinforced composites:  Reprecipitation mechanisms in different metallic melts, 361-366, ibid.

  16. P. Triantafyllou, A. Lekatou, A. K. Sfikas, E. Georgatis, A.E. Karantzalis, Vacuum Arc Melting processed Fe-Al matrix based intermetallic composites, reinforced with TiC phases: Assessment of microstructure, sliding wear and aqueous corrosion response, 481-486, ibid.

  17. V. Gousia, A. Tsioukis, A. Lekatou, K. Lentzaris, A.E. Karantzalis, Al-MoSi2 composites: Microstructure, sliding wear resistance, solid particle erosion and aqueous corrosion, 457-462, ibid.

  18. K. Chatziara, K. Lentzaris, A.G Lekatou, N.M. Barkoula, A. Poulia, A.E. Karantzalis, Αl – based submicron WC particulate reinforced composites: Production, microstructure characterisation and sliding wear, solid particle erosion behaviour assessment, 463-468, ibid.

  19. Α. Poulia, D. Petroglou, Ε. Georgatis, Α. Lekatou, A.Ε. Karantzalis, Development and characterization of refractory high entropy alloys, 299-304, ibid.

  20. E. E. Bata, K. Lentzaris, A. Lekatou, N. Barkoula, A.E. Karantzalis, Effect of solid particle erosion of Ti6Al4V sheet: Effect on surface characteristics and aqueous corrosion behaviour, 445-450, ibid.

  21. Α. Μarinou, A. Lekatou, G. Xanthopoulou, G. Vekinis, Μ. Vardavoulias, Fabrication of Ni-Al coatings by new technique CAFSY and electrochemical behaviour in 3.5% NaCl, 503-505, ibid .

  22. A.G. Lekatou, I. Kenanoglou, K. Kalantzis, A.E. Karantzalis, D. Sioulas, K. Lentzaris,Free sintering fabrication of composites from Al2O3 and Ni nanopowders and surface property evaluation, XXXII Panhellenic Conf. on Solid State Physics and Materials Science, 18-21 September 2016, Ioannina, Greece ¥

  23. A. Lekatou, N. Gkikas, A.E. Karantzalis, G. Kaptay, Z. Gacsi, P. Baumli, A. Simon, Surface degradation of aluminium matrix composites reinforced by WC nanoparticles and aluminide particles, ibid ¥

  24. Α. Poulia, D. Petroglou, Ε. Georgatis, Α. Lekatou, A.Ε. Karantzalis, Microstructural features and primary thermal analysis investigation of a refractory high entropy MoTaWNbV alloy, 7th Panhellenic Conf. on Thermal Analysis-Therma 2016, 27-29 May 2016, Ioannina, Greece ¥

  25. A. Marinou, G. Xanthopoulou, G. Vekinis, A. Lekatou, Aqueous corrosion of Ni-Al composite coatings by combustion-assisted flame spraying, 30th Panhellenic Conf. on Solid-State Physics and Materials Science September 21-24, 2014 Heraklion, Crete ¥

  26. A. Lekatou, A.K. Sfikas, A.E. Karantzalis, Effect of heat treatments on the corrosion resistance of Al-Co alloys, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, p. 495-500, in Greek.

  27. A. Lekatou, A. Koletti, V. Moulia, A.E. Karantzalis, D. Sioulas, D. Grimanelis, Toughness study of nanostructured cermet coatings, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, p. 473-479, in Greek.

  28. A.K. Sfikas, A. Lekatou, A.E. Karantzalis, D. Sioulas, The role of Complex Metallic Alloys in the electrochemical behaviour of the system Al-Co, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, p.233-238, in Greek.

  29. A.E. Karantzalis, A. Lekatou , A. Evangelou, V. Gousia, Z. Gacsi, P. Baumli, G. Kaptay, A. Simon, Microstructure of aluminium matrix/ carbide nanoparticle, corrosion and wear resistance assessment, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, p. 481-487, in Greek.

  30. A. Poulia, A. Lekatou, A.E. Karantzalis, E. Georgatis, Heat treatments and wear/corrosion properties of AlMgSi, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, 257-262, in Greek.

  31. D. Sioulas, A. Lekatou, D. Grimanelis, Α. Ε. Karantzalis, Corrosion and wear performance of nanostructured and conventional HVOF WC-Co-Cr coatings, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, 297-302, in Greek.

  32. H. Mavros, A.E. Karantzalis, A. Lekatou, Al matrix ceramic particulate composites: A comparative study of corrosion and sliding wear, 5th Pan-Hellenic Conference in Metallic Materials, Volos, 21-22 Nov. 2013, p. 285-290, in Greek.

  33. A.E. Karantzalis, A. Lekatou, D. Batsouli, E. Georgatis, V. Drakopoulos, Effect of heat treatment on the corrosion and wear resistance of Fe-Al aluminides reinforced by TiB2, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, p. 411-416, in Greek.

  34. A.E. Karantzalis, A. Lekatou, Ch. Miskaki, A. Evangelou, V. Gousia, A.K. Sfikas, D. Sioulas, P. Baumli, Z. Gacsi, G. Kaptay, A. Simon, Microstructure and corrosion resistance of aluminium matrix reinforced by TiC and WC nanoparticles and prepared by powder metallurgy, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, p. 489-494, in Greek.

  35. A.E. Karantzalis, A. Lekatou, E. Karapanou, E. Georgatis, Fabrication, aqueous corrosion and sliding wear performance of Fe-Al aluminide reinforced by VC, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, p. 501-506, in Greek.

  36. A.E. Karantzalis, A. Lekatou, E. Georgatis, E. Baltajianis, Fabrication, aqueous corrosion and wear behaviour study of Fe-Al aluminide reinforced by TiB2, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, 507-513, in Greek.

  37. K. Leontaris, A.E. Karantzalis, A. Lekatou, S. Agathopoulos, Powder metallurgy fabrication and mechanical properties of Al matrix composites reinforced by WC nanoparticles, 5th Pan-Hellenic Conf. in Metallic Materials, Volos, 21-22 Nov. 2013, p. 399-404, in Greek.

  38. Lekatou A., D. Zois, Τ. Vaimakis, Μ. Vardavoulias, Nanosteel coatings: microstructure and annealing behaviour investigation by combining X-ray diffraction and differential scanning calorimetry, 4th Hellenic Conf. of Thermal Analysis, 23 Oct. 2010, in Greek

  39. D. Zois, A. Lekatou, Μ. Vardavoulias,Α. Vazdirvanidis, Thermal spray deposition of nanostructured martensitic steel agglomerates, 4th Pan-Hellenic Conf. in Metallic Materials, Thessaloniki, 4-5 Nov. 2010, p. 3-8, ISBN 978-960-6865-31-2, in Greek 

  40. Α. Sfikas, A. Lekatou, Α. Ε. Karantzalis, D. Sioulas, Development and characterization of a binary Al-Co alloy, 4th Pan-Hellenic Conf. in Metallic Materials, Thessaloniki, 4-5 Nov. 2010, p. 369-375, ISBN 978-960-6865-31-2, in Greek  

  41. D. Sioulas, A. Lekatou, D. Grimanelis, Α. Ε. Karantzalis,Wear and acid rain corrosion performance of nanostructured cermet coatings, 4th Pan-Hellenic Conf. in Metallic Materials, Thessaloniki, 4-5 Nov. 2010, p. 393-398, ISBN 978-960-6865-31-2, in Greek  

  42. D. Zois, A. Lekatou, Μ. Vardavoulias, Α. Vazdirvanidis, Α. Ε. Karantzalis,Effect of spraying parameters on the corrosion behaviour of metastable iron coatings, 4th Pan-Hellenic Conf. in Metallic Materials, Thessaloniki, 4-5 Nov. 2010, p. 211-216, ISBN 978-960-6865-31-2, in Greek 

  43. Serafis A., A. Lekatou, Α. Ε. Karantzalis, D. Sioulas., High temperature oxidation of a super austenitic stainless steel, 4th Pan-Hellenic Conf. in Metallic Materials, Thessaloniki, 4-5 Nov. 2010, p. 235-240, ISBN 978-960-6865-31-2, in Greek. 

  44. Α. Marinou, A. Lekatou,Α. Poulaki, Vardavoulias, Α. Ε. Karantzalis, D. Sioulas,Η. Mavros,Acomparativestudyofaustenitic stainlesscoatingsmanufacturedbyflamespraying,4th Pan-Hellenic Conf. in Metallic Materials, Thessaloniki, 4-5 Nov. 2010, p. 37-42, ISBN 978-960-6865-31-2, in Greek. 

  45. K. Leontaris, S. Petousi, A. Lekatou, A.E. Karantzalis, Al reinforcement by nano-TiC particles via casting and powder metallurgy processes,4th Pan-Hellenic Conf. in Metallic Materials, Thessaloniki, 4-5 Nov. 2010, p. 413-420, ISBN 978-960-6865-31-2, in Greek

  46. H. Mavros, A. Lekatou, A.E. Karantzalis, V. Poulas E. Georgatis, Casting based production of Al-TiC-AlB2 composite material via KBF4 salt use, 4th Hellenic Conf. in Metallic Materials, Thessaloniki, 4-5 Nov. 2010, p. 405-411, ISBN 978-960-6865-31-2, in Greek 

  47. Siatou A., A. Lekatou, A.E. Karantzalis, Ioannina prefecture Cu and Fe archeological artefacts corrosion, 4th Pan-Hellenic Conf. in Metallic Materials, Thessaloniki, 4-5 Nov. 2010, p. 185-190, ISBN 978-960-6865-31-2, in Greek 

  48. D. Sioulas, A. Lekatou, D. Grimanelis, Α. Ε. Karantzalis, Fabrication and characterization of nanocermet WC-10Co-4Cr coatings, 6th Panhellenic Conference in Ceramic Materials, Athens, 3-4 Apr. 2014 

  49. Lekatou A., D. Sioulas, D. Grimanelis, A. Karanika, Α. Ε. Karantzalis, Corrosion resistance of nanostructured HVOF coatings in a saline environment, 5th Pan-Hellenic Conf. in Ceramic Materials, Athens, 22-23 Οκτ. 2009, in Greek.

  50. Ε. Diamanti, Ι. Papadas, A. Lekatou,Ι. Deligiannakis, Μ.Α. Karakassides, Glassification of alumino-silicate minerals having adsorbed heavy metals: Characterization and chemical durability determination, 5th Pan-Hellenic Conf. in Ceramic Materials, Athens, 22-23 Οκτ. 2009, in Greek.

  51. Lekatou A.,D. Zois, Α. Vazdirvanidis, D. Grimanelis, Electrochemical investigation on cermet coatings deposited on an aluminium alloy substrate,3rd Pan-Hellenic Conf. in Metallic Materials, 6-7 Dec. 2007, Patras, p. 57-63, ISBN 978-960-88104-1-9, in Greek

  52. Α. Ε. Karantzalis, A. Lekatou,P. Logothetis, Thermal treatment effect on the microstructure, mechanical behaviour and corrosion behaviour of a Cu-9Αl-1Τi bronze, 3rd Pan-HellenicConf.inMetallicMaterials, 6-7 Dec. 2007, Patras, ISBN 978-960-88104-1-9, in Greek

  53. D. Sioulas, A. Lekatou,Aqueous corrosion resistance of a Ni-Cr-Nbsuperalloy, 3rd Pan-HellenicConferenceinMetallicMaterials, 6-7 Dec. 2007, Patras, p. 514-519, ISBN 978-960-88104-1-9, in Greek.

  54. E. Georgatis, A. Lekatou, Ε. Petropoulos, S. Katsamakis, Thermal treatment effect on the microstructure, mechanical and corrosion properties of aAl-7%Mg-5%Si cast alloy, 3rd Pan-HellenicConf.inMetallicMaterials, 6-7 Dec. 2007, Patras, p. 130-141, ISBN 978-960-88104-1-9, in Greek.

  55. Α.Ε. Karantzalis,A. Lekatou,Η. Mavros, G. Karamanos, Thermal treatment and alloying addition effect on the microstructure and mechanical properties of high chromium cast irons, 3rd Pan-HellenicConferenceinMetallicMaterials, 6-7 Dec. 2007, Patras, p. 557-566, ISBN 978-960-88104-1-9, in Greek.

  56. Ε. Diamanti, Α. Georgoulas, A. Lekatou, Th. MatikasκαιΜ. Karakassides, Effect of alumina-silicate mineral additions on the structure and properties of boric glasses, 23rd Pan-Hellenic Confer. of Solid State Physics and Materials Science, 23-26 Sept. 2007, Athens, in Greek.

  57. L. Nakis, T. Tsoufis, D. Gournis, A. Lekatou,Μ. Α. Karakassides, Synthesis and characterization of nanomaterialsΝylon-6/10 with layered clays and carbon nanotubes, XXIΙ Pan-Hellenic Conf. of Solid State Physics and Materials Science, Patras, 24-27 Sept. 2006, in Greek.

  58. S. Lekatos, A. Lekatou, Metal dusting of iron aluminides, 2nd Pan-HellenicConf.inMetallicMaterials, Athens, 25-26 Nov. 2004, p. 223-229, in Greek.

  59. E. Georgatis, A. Lekatou, P. Polatidis, Α. Georgantzoglou, Optimization of mechanical properties of aluminium alloys by a new casting technology, 2ndPan-HellenicConf.inMetallicMaterials, Athens, 25-26 Nov. 2004, p. 209-214, in Greek.

  60. Lekatou A., D. Grimanelis, R. Marini, C. Zouridakis: Corrosion behaviour of HVOF coatings, 2nd  Pan-HellenicConf.inMetallicMaterials, Athens, 25-26 Nov. 2004, p. 563-569, in Greek.

  61. D. Tsivoulas, A. Lekatou, Thermaltreatmenteffecton the thermo-mechanical behaviour of shape memory alloys, Pan-Hellenic Conference of Solid State Physics and Materials Science, 26-29 Sept. 2004, p. 87-89, in Greek.

  62. D. Tsivoulas, A. Lekatou, Ε. Georgatis, Thermo-mechanicalcyclingeffectontheproperties of Ni-Ti shape memory alloys,ΧΧ Pan-Hellenic Conf. of Solid State Physics and Materials Science, 26-29 Sept. 2004, p. 93-95, in Greek.

  63. Lekatou A., Quantitative mineralogical analysis of bauxites by the aid of thermal analysis, 2nd Pan-HellenicConf.ofThermalAnalysis, 25-26 Jun. 2004, 199-206, in Greek.

© METAL - LAB GROUP 2013